Keyless remotes for all Nissan vehicles, with free programming instructions and 6 months email support
Not sure if you vehicle has factory keyless entry?
Follow the Verification procedure:
1. Close and lock all doors with the driver’s side power lock/unlock switch.
2. Insert key into ignition and remove it from the ignition key cylinder at least six times
within 10 seconds. Your Hazard Lamps will flash if you have performed this step
successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this
procedure is performed too fast, system will not enter programming mode.
If your hazard lamps FLASH then you have factory installed keyless entry. |