We provide these instructions free of charge for everyone to use. If you purchase a remote from us, we offer free technical support via email for one year. Instructions are for the use of you the end user and we do not give permission to distribute or publish any content from www.programyoufob.com
Keyless entry verification: If you are not sure if your vehicle is equipped with keyless entry follow steps 1 thru 9, if your door locks, LOCK AND UNLOCK, then your vehicle is equipped with keyless entry.
2001 THRU 2007 GMC ENVOY KEYLESS ENTRY INSTRUCTIONS
PROGRAMMING INSTRUCTIONS
WWW.PROGRAMYOURFOB.COM
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.
Please tell your friends and family about our great products!!
Remote jackets in stock now!
We are easily found on the web at
WWW.PROGRAMYOURFOB.COM |